The Bugatti vice that Tula Engineering have recently made to order is a direct copy of the original Factory vice used by engineers throughout the company’s workshops.

It is a machined from Bugatti’s drawings and we have used all the specified materials where marked. The cast iron body with either an surface plate or plain back is finished in a tough long suffering satin mat block paint. This finish is resistant to many chemicals, petrol and oil and paint thinners and has great chip resistance. The hardened and ground vice jaws close to a perfect fit and when used lead to a perfect closing action. There is no other vice like it.

The vice comes with a XX long bench pin that screws into the base and a locking handle allowing the vice to be swivelled on the bench top for long drop work.

For best use the vice should be mounted with onto a 30mm thick bench top over a solid bench leg preferably of Bugatti design. The throw of the jaws is a max 180mm and 125mm wide. The top of the vice jaws should be the same height as the users elbow from the ground to provide the correct actuation when filing.

The vice has a total length of 500mm, width of 200mm and height of 245mm and its total weight is 48Kg. The lead time for each is 12 weeks from receipt of deposit at 50% total retail price. The Bugatti vice is the ultimate working tool and a must for any precision engineer.

The Price for the vice is £3500 plus VAT and £500 for ali bench leg.